Skip to main content
Inspection outcome
Opened: November 10, 2022 · Closed: May 30, 2023
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations6
Serious+0
Initial penalty$3,130
Current penalty$2,205
Accidents0
Duration201d
Summary

What happened in this inspection

On November 10, 2022, OSHA opened Diamond Pacific Supply, Llc’s inspection #346337793 at AUBURN, California. The case was administratively closed on May 30, 2023, 201 days after opening.

OSHA cited the employer for 6 violations totaling $2,205 in current penalties — reduced from an initial proposed total of $3,130. All citations were Other-than-serious.

Breakdown by classification
6violations total
Other-than-serious6100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

6citations issued
$2,205current penalty
↓ $925total reduction
Look up on OSHA.gov
Other
Citation #01001
6151(C)(1)General Duty Clause or unstructured citation
Initial$375
Current$300reduced by $75
Othergravity 5
Citation #01002
29 CFR 2340.16(c)View full regulation text on OSHA.gov
Initial$420
Current$335reduced by $85
Othergravity 5
Citation #01003
29 CFR 2340.2(b)View full regulation text on OSHA.gov
Initial$420
Current$225reduced by $195
Othergravity 5
Citation #01004
29 CFR 2473.2(a)View full regulation text on OSHA.gov
Initial$420
Current$335reduced by $85
Othergravity 5
Citation #01005
3241(C)General Duty Clause or unstructured citation
Initial$560
Current$450reduced by $110
Othergravity 10
Citation #01006
6170(C)(2)(A)General Duty Clause or unstructured citation
Initial$935
Current$560reduced by $375

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346337793 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Diamond Pacific Supply, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346337793 directly: