Skip to main content
Inspection outcome
Opened: October 23, 2018 · Closed: April 20, 2023
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations7
Serious+0
Initial penalty$21,800
Current penalty$10,355
Accidents0
Duration1640d
Summary

What happened in this inspection

On October 23, 2018, OSHA opened Chan Tak Chung’s inspection #343563748 at IRVINE, California — an establishment in the all other specialty trade contractors industry. The case was administratively closed on April 20, 2023, 1640 days after opening.

OSHA cited the employer for 7 violations totaling $10,355 in current penalties — reduced from an initial proposed total of $21,800. All citations were Other-than-serious.

Breakdown by classification
7violations total
Repeat114%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious229%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious457%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

7citations issued
$10,355current penalty
↓ $11,445total reduction
Look up on OSHA.gov
Othergravity 10
Citation #01001
1509(A)General Duty Clause or unstructured citation
Initial$810
Current$185reduced by $625
Othergravity 5
Citation #01002
1512(C)(1)General Duty Clause or unstructured citation
Initial$240
Current$185reduced by $55
Othergravity 5
Citation #01003
29 CFR 2500.10(a)View full regulation text on OSHA.gov
Initial$240
Current$185reduced by $55
Othergravity 10
Citation #01004
3328(A)(2)General Duty Clause or unstructured citation
Initial$810
Current$500reduced by $310
Seriousgravity 10
Citation #02001
3382(A)General Duty Clause or unstructured citation
Initial$5,850
Current$2,250reduced by $3,600
Seriousgravity 10
Citation #03001
3583(D)General Duty Clause or unstructured citation
Initial$5,850
Current$2,250reduced by $3,600
Repeatgravity 10
Citation #04001
3395(I)General Duty Clause or unstructured citation
Initial$8,000
Current$4,800reduced by $3,200

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343563748 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Chan Tak Chung

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343563748 directly: