Skip to main content
Inspection outcome
Opened: December 2, 2021 · Closed: March 2, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations6
Serious+0
Initial penalty$2,920
Current penalty$2,920
Accidents0
Duration90d
Summary

What happened in this inspection

On December 2, 2021, OSHA opened Trinity Steel Corporation’s inspection #345669030 at SANTA PAULA, California. The case was administratively closed on March 2, 2022, 90 days after opening.

OSHA cited the employer for 6 violations totaling $2,920 in current penalties. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious117%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious583%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

6citations issued
$2,920current penalty
Look up on OSHA.gov
Other
Citation #01001
461(A)General Duty Clause or unstructured citation
Initial$225
Current$225
Other
Citation #01002
3241(A)General Duty Clause or unstructured citation
Initial$225
Current$225
Othergravity 10
Citation #01003
4310(A)General Duty Clause or unstructured citation
Initial$225
Current$225
Othergravity 1
Citation #01004
5144(C)General Duty Clause or unstructured citation
Initial$110
Current$110
Othergravity 1
Citation #01005
6151(E)General Duty Clause or unstructured citation
Initial$110
Current$110
Seriousgravity 10
Citation #02001
3210(A)General Duty Clause or unstructured citation
Initial$2,025
Current$2,025

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345669030 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Trinity Steel Corporation

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345669030 directly: