Skip to main content
Inspection outcome
Opened: October 22, 2024 · Closed: May 1, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations23
Serious+0
Initial penalty$41,064
Current penalty$15,867
Accidents0
Duration191d
Summary

What happened in this inspection

On October 22, 2024, OSHA opened Acme Monaco Corporation’s inspection #347832917 at NEW BRITAIN, Connecticut. The case was administratively closed on May 1, 2025, 191 days after opening.

OSHA cited the employer for 23 violations totaling $15,867 in current penalties — reduced from an initial proposed total of $41,064. All citations were Other-than-serious.

Breakdown by classification
23violations total
Serious1148%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious1252%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

23citations issued
$15,867current penalty
↓ $25,197total reduction
Look up on OSHA.gov
Othergravity 1
Citation #01001A
29 CFR 1910.124(j)(2)(i)View full regulation text on OSHA.gov
Initial$4,666
Current$2,333reduced by $2,333
Othergravity 1
Citation #01001B
29 CFR 1910.124(j)(3)View full regulation text on OSHA.gov
Initial$4,666
Current$0reduced by $4,666
Seriousgravity 1
Citation #01002A
29 CFR 1910.132(d)(1)View full regulation text on OSHA.gov
Initial$4,666
Current$2,333reduced by $2,333
Seriousgravity 1
Citation #01002B
29 CFR 1910.133(a)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01003A
29 CFR 1910.178(l)(1)(i)View full regulation text on OSHA.gov
Initial$4,666
Current$2,333reduced by $2,333
Seriousgravity 5
Citation #01004A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$7,779
Current$3,890reduced by $3,889
Seriousgravity 1
Citation #01004B
29 CFR 1910.212(a)(4)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 1
Citation #01005A
29 CFR 1910.305(g)(1)(iv)(a)View full regulation text on OSHA.gov
Initial$4,666
Current$2,333reduced by $2,333
Seriousgravity 5
Citation #01006A
29 CFR 1910.332(b)(1)View full regulation text on OSHA.gov
Initial$5,289
Current$2,645reduced by $2,644
Seriousgravity 1
Citation #01007A
29 CFR 1910.1030(c)(1)(iv)View full regulation text on OSHA.gov
Initial$4,666
Current$0reduced by $4,666
Other
Citation #02005
29 CFR 1910.242(b)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347832917 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347832917 directly: