Skip to main content
Inspection outcome
Opened: April 29, 2021 · Closed: November 26, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations14
Serious+0
Initial penalty$40,960
Current penalty$25,803
Accidents0
Duration1307d
Summary

What happened in this inspection

On April 29, 2021, OSHA opened Diamond State Water Proofing’s inspection #345279012 at TOWNSEND, Delaware — an establishment in the new single-family housing construction industry. The case was administratively closed on November 26, 2024, 1307 days after opening.

OSHA cited the employer for 14 violations totaling $25,803 in current penalties — reduced from an initial proposed total of $40,960. All citations were Other-than-serious.

Breakdown by classification
14violations total
Serious14100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

14citations issued
$25,803current penalty
↓ $15,157total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001A
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229
Seriousgravity 10
Citation #01001B
29 CFR 1910.134(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01001C
29 CFR 1910.134(k)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229
Seriousgravity 10
Citation #01002C
29 CFR 1910.1200(h)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01003
29 CFR 1926.21(b)(2)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229
Seriousgravity 10
Citation #01004
29 CFR 1926.50(d)(1)View full regulation text on OSHA.gov
Initial$4,096
Current$0reduced by $4,096
Seriousgravity 10
Citation #01005
29 CFR 1926.150(a)(2)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229
Seriousgravity 10
Citation #01006
29 CFR 1926.407(b)(1)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229
Seriousgravity 10
Citation #01007
29 CFR 1926.1203(a)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229
Seriousgravity 10
Citation #01008
29 CFR 1926.1204(b)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229
Seriousgravity 10
Citation #01009
29 CFR 1926.1204(c)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229
Seriousgravity 10
Citation #01010
29 CFR 1926.1204(f)View full regulation text on OSHA.gov
Initial$4,096
Current$2,867reduced by $1,229

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345279012 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345279012 directly: