Skip to main content
Inspection outcome
Opened: March 5, 2019 · Closed: May 17, 2021
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations3
Serious+0
Initial penalty$4,508
Current penalty$3,155
Accidents0
Duration804d
Summary

What happened in this inspection

On March 5, 2019, OSHA opened Pacific Welding Machinery & Muffler Services’s inspection #343829834 at HAGATNA, Guam. The case was administratively closed on May 17, 2021, 804 days after opening.

OSHA cited the employer for 3 violations totaling $3,155 in current penalties — reduced from an initial proposed total of $4,508. All citations were Other-than-serious.

Breakdown by classification
3violations total
Serious3100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

3citations issued
$3,155current penalty
↓ $1,353total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$2,576
Current$1,803reduced by $773
Seriousgravity 1
Citation #01002A
29 CFR 1910.219(d)(1)View full regulation text on OSHA.gov
Initial$1,932
Current$1,352reduced by $580

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343829834 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Pacific Welding Machinery & Muffler Services

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343829834 directly: