Skip to main content
Inspection outcome
Opened: June 29, 2022 · Closed: October 20, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations6
Serious+0
Initial penalty$10,566
Current penalty$7,396
Accidents0
Duration113d
Summary

What happened in this inspection

On June 29, 2022, OSHA opened Advanced Silicon Carbide Materials Llc’s inspection #346050065 at LIHUE, Hawaii. The case was administratively closed on October 20, 2022, 113 days after opening.

OSHA cited the employer for 6 violations totaling $7,396 in current penalties — reduced from an initial proposed total of $10,566. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious6100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

6citations issued
$7,396current penalty
↓ $3,170total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.212(b)View full regulation text on OSHA.gov
Initial$2,818
Current$1,973reduced by $845
Seriousgravity 1
Citation #01002A
29 CFR 1910.215(a)(4)View full regulation text on OSHA.gov
Initial$2,113
Current$1,479reduced by $634
Seriousgravity 1
Citation #01002B
29 CFR 1910.215(b)(9)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003A
29 CFR 1910.305(b)(1)(ii)View full regulation text on OSHA.gov
Initial$3,522
Current$2,465reduced by $1,057
Seriousgravity 1
Citation #01004
29 CFR 1910.305(g)(1)(iv)View full regulation text on OSHA.gov
Initial$2,113
Current$1,479reduced by $634

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346050065 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346050065 directly: