Skip to main content
Inspection outcome
Opened: August 27, 2024 · Closed: February 13, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$31,296
Current penalty$15,649
Accidents0
Duration170d
Summary

What happened in this inspection

On August 27, 2024, OSHA opened Boise Metal Works, Inc.’s inspection #347550402 at BOISE, Idaho. The case was administratively closed on February 13, 2025, 170 days after opening.

OSHA cited the employer for 6 violations totaling $15,649 in current penalties — reduced from an initial proposed total of $31,296. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious6100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

6citations issued
$15,649current penalty
↓ $15,647total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$5,485
Current$2,743reduced by $2,742
Seriousgravity 5
Citation #01002
29 CFR 1910.147(c)(1)View full regulation text on OSHA.gov
Initial$9,680
Current$4,840reduced by $4,840
Seriousgravity 10
Citation #01003A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$11,292
Current$5,646reduced by $5,646
Seriousgravity 10
Citation #01003B
29 CFR 1910.213(p)(4)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01003C
29 CFR 1910.215(b)(9)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01004
29 CFR 1910.242(b)View full regulation text on OSHA.gov
Initial$4,839
Current$2,420reduced by $2,419

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347550402 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347550402 directly: