Skip to main content
Inspection outcome
Opened: December 12, 2019 · Closed: September 14, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations10
Serious+0
Initial penalty$6,361
Current penalty$3,182
Accidents0
Duration277d
Summary

What happened in this inspection

On December 12, 2019, OSHA opened Intermountain Fabrication L.l.c.’s inspection #344509765 at JEROME, Idaho — an establishment in the machine shops industry. The case was administratively closed on September 14, 2020, 277 days after opening.

OSHA cited the employer for 10 violations totaling $3,182 in current penalties — reduced from an initial proposed total of $6,361. All citations were Other-than-serious.

Breakdown by classification
10violations total
Serious10100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

10citations issued
$3,182current penalty
↓ $3,179total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01003B
29 CFR 1910.1200(g)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003C
29 CFR 1910.1200(h)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01001A
29 CFR 1910.94(a)(3)(i)View full regulation text on OSHA.gov
Initial$1,735
Current$868reduced by $867
Seriousgravity 5
Citation #01002A
29 CFR 1910.1053(d)(1)View full regulation text on OSHA.gov
Initial$2,313
Current$1,157reduced by $1,156
Seriousgravity 5
Citation #01002C
29 CFR 1910.1053(j)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$2,313
Current$1,157reduced by $1,156

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344509765 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Intermountain Fabrication L.l.c.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344509765 directly: