Skip to main content
Inspection outcome
Opened: August 15, 2019 · Closed: April 3, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations12
Serious+0
Initial penalty$45,330
Current penalty$45,330
Accidents0
Duration1693d
Summary

What happened in this inspection

On August 15, 2019, OSHA opened Frame & Finish Carpenters, Inc.’s inspection #344237110 at CHICAGO, Illinois — an establishment in the framing contractors industry. The case was administratively closed on April 3, 2024, 1693 days after opening.

OSHA cited the employer for 12 violations totaling $45,330 in current penalties. All citations were Other-than-serious.

Breakdown by classification
12violations total
Repeat217%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious975%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious18%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

12citations issued
$45,330current penalty
Look up on OSHA.gov
Other
Citation #03001
29 CFR 1903.19(c)(1)View full regulation text on OSHA.gov
Initial$319
Current$319
Seriousgravity 5
Citation #01007A
29 CFR 1926.1053(b)(15)View full regulation text on OSHA.gov
Initial$3,751
Current$3,751
Repeatgravity 10
Citation #02001
29 CFR 1926.501(b)(13)View full regulation text on OSHA.gov
Initial$8,752
Current$8,752
Repeatgravity 10
Citation #02002
29 CFR 1926.1053(b)(1)View full regulation text on OSHA.gov
Initial$8,752
Current$8,752
Seriousgravity 10
Citation #01004
29 CFR 1926.451(g)(1)View full regulation text on OSHA.gov
Initial$4,376
Current$4,376
Seriousgravity 10
Citation #01005
29 CFR 1926.701(b)View full regulation text on OSHA.gov
Initial$4,376
Current$4,376
Seriousgravity 5
Citation #01006
29 CFR 1926.1053(b)(4)View full regulation text on OSHA.gov
Initial$3,751
Current$3,751
Seriousgravity 5
Citation #01001
29 CFR 1910.178(l)(1)(i)View full regulation text on OSHA.gov
Initial$3,126
Current$3,126
Seriousgravity 5
Citation #01002
29 CFR 1926.100(a)View full regulation text on OSHA.gov
Initial$3,751
Current$3,751

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344237110 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Frame & Finish Carpenters, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344237110 directly: