Skip to main content
Inspection outcome
Opened: May 18, 2023 · Closed: November 27, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations4
Serious+0
Initial penalty$158,445
Current penalty$45,000
Accidents0
Duration559d
Summary

What happened in this inspection

On May 18, 2023, OSHA opened Manor Tool And Manufacturing Co.’s inspection #346713381 at SCHILLER PARK, Illinois. The case was administratively closed on November 27, 2024, 559 days after opening.

OSHA cited the employer for 4 violations totaling $45,000 in current penalties — reduced from an initial proposed total of $158,445. All citations were Other-than-serious.

Breakdown by classification
4violations total
Serious4100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

4citations issued
$45,000current penalty
↓ $113,445total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #02001
29 CFR 1910.147(d)View full regulation text on OSHA.gov
Initial$125,007
Current$11,250reduced by $113,757
Seriousgravity 10
Citation #02002
29 CFR 1910.147(d)View full regulation text on OSHA.gov
Initial$11,250
Current$11,250
Seriousgravity 10
Citation #02003
29 CFR 1910.147(d)View full regulation text on OSHA.gov
Initial$11,250
Current$11,250

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346713381 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Manor Tool And Manufacturing Co.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346713381 directly: