Skip to main content
Inspection outcome
Opened: January 11, 2019 · Closed: January 10, 2025
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations11
Serious+11
Initial penalty$9,850
Current penalty$4,924
Accidents0
Duration2191d
Summary

What happened in this inspection

On January 11, 2019, OSHA opened 109302 - Midwestern Steel Fabricators’s inspection #343708418 at HAMMOND, Indiana. The case was administratively closed on January 10, 2025, 2191 days after opening.

OSHA cited the employer for 11 violations totaling $4,924 in current penalties — reduced from an initial proposed total of $9,850. Of those, 11 were classified as Serious or worse.

Breakdown by classification
11violations total
Serious11100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

11citations issued
$4,924current penalty
↓ $4,926total reduction
Look up on OSHA.gov
Serious
Citation #01006A
29 CFR 1910.106(e)(9)(i)View full regulation text on OSHA.gov
Initial$700
Current$350reduced by $350
Serious
Citation #01007
29 CFR 1910.107(c)(2)View full regulation text on OSHA.gov
Initial$700
Current$350reduced by $350
Serious
Citation #01008
29 CFR 1910.107(g)(5)View full regulation text on OSHA.gov
Initial$700
Current$350reduced by $350
Serious
Citation #01010
29 CFR 1910.307(c)View full regulation text on OSHA.gov
Initial$2,500
Current$1,250reduced by $1,250

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343708418 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343708418 directly: