Skip to main content
Inspection outcome
Opened: June 7, 2022 · Status: Open
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations12
Serious+0
Initial penalty$6,687
Current penalty$6,687
Accidents0
Duration
Summary

What happened in this inspection

On June 7, 2022, OSHA opened Jy Renovations Llc’s inspection #346002553 at FALLSTON, Maryland — an establishment in the siding contractors industry. The case remains open or the close date has not yet been published.

OSHA cited the employer for 12 violations totaling $6,687 in current penalties. All citations were Other-than-serious.

Breakdown by classification
12violations total
Repeat325%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious433%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious542%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

12citations issued
$6,687current penalty
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1926.300(a)View full regulation text on OSHA.gov
Initial$437
Current$437
Seriousgravity 7
Citation #01002B
29 CFR 1926.454(a)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 7
Citation #01002C
29 CFR 1926.454(b)View full regulation text on OSHA.gov
Initial$0
Current$0
Repeatgravity 6
Citation #02001
29 CFR 1926.501(b)(13)View full regulation text on OSHA.gov
Initial$2,400
Current$2,400
Repeatgravity 6
Citation #02002
29 CFR 1926.503(a)(1)View full regulation text on OSHA.gov
Initial$2,400
Current$2,400
Repeatgravity 10
Citation #03001
29 CFR 1926.503(b)(1)View full regulation text on OSHA.gov
Initial$400
Current$400
Othergravity 5
Citation #04002
29 CFR 1926.451(b)(7)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #04003
29 CFR 1926.451(c)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #04004
29 CFR 1926.452(j)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #04005
29 CFR 1926.1051(a)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346002553 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Jy Renovations Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346002553 directly: