Skip to main content
Inspection outcome
Opened: January 22, 2026 · Closed: March 24, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$4,500
Current penalty$2,250
Accidents0
Duration61d
Summary

What happened in this inspection

On January 22, 2026, OSHA opened Metro Fabricating’s inspection #348701608 at BAY CITY, Michigan. The case was administratively closed on March 24, 2026, 61 days after opening.

OSHA cited the employer for 6 violations totaling $2,250 in current penalties — reduced from an initial proposed total of $4,500. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious6100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

6citations issued
$2,250current penalty
↓ $2,250total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
408.11859(1)General Duty Clause or unstructured citation
Initial$1,500
Current$750reduced by $750
Seriousgravity 5
Citation #01002A
408.13395C(2)General Duty Clause or unstructured citation
Initial$1,500
Current$750reduced by $750
Seriousgravity 5
Citation #01002B
408.13308(2)(A)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 5
Citation #01002C
5A0001General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 5
Citation #01003A
408.12132(3)General Duty Clause or unstructured citation
Initial$1,500
Current$750reduced by $750
Seriousgravity 5
Citation #01003B
408.12167(2)General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348701608 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Metro Fabricating

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348701608 directly: