Skip to main content
Inspection outcome
Opened: September 26, 2018 · Closed: May 17, 2019
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations5
Serious+0
Initial penalty$5,400
Current penalty$2,700
Accidents0
Duration233d
Summary

What happened in this inspection

On September 26, 2018, OSHA opened Envisiontec Inc’s inspection #343489811 at DEARBORN, Michigan. The case was administratively closed on May 17, 2019, 233 days after opening.

OSHA cited the employer for 5 violations totaling $2,700 in current penalties — reduced from an initial proposed total of $5,400. All citations were Other-than-serious.

Breakdown by classification
5violations total
Repeat120%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Other-than-serious480%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

5citations issued
$2,700current penalty
↓ $2,700total reduction
Look up on OSHA.gov
Repeatgravity 5
Citation #01001
29 CFR 1910.134(c)(2)(ii)View full regulation text on OSHA.gov
Initial$4,800
Current$2,400reduced by $2,400
Other
Citation #02002A
408.22129(1)General Duty Clause or unstructured citation
Initial$600
Current$300reduced by $300
Other
Citation #02002B
408.22133(1)General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343489811 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Envisiontec Inc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343489811 directly: