Skip to main content
Inspection outcome
Opened: July 30, 2025 · Closed: October 27, 2025
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations6
Serious+1
Initial penalty$10,100
Current penalty$5,050
Accidents0
Duration89d
Summary

What happened in this inspection

On July 30, 2025, OSHA opened Fraser Grinding Co’s inspection #348405549 at FRASER, Michigan — an establishment in the machine shops industry. The case was administratively closed on October 27, 2025, 89 days after opening.

OSHA cited the employer for 6 violations totaling $5,050 in current penalties — reduced from an initial proposed total of $10,100. Of those, 1 was classified as Serious or worse.

Breakdown by classification
6violations total
Repeat233%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious467%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

6citations issued
$5,050current penalty
↓ $5,050total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
408.11872(3)General Duty Clause or unstructured citation
Initial$2,000
Current$1,000reduced by $1,000
Seriousgravity 5
Citation #01002A
408.12152(1)General Duty Clause or unstructured citation
Initial$2,000
Current$1,000reduced by $1,000
Seriousgravity 5
Citation #01002B
408.12153(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 5
Citation #01003
408.13370(1)General Duty Clause or unstructured citation
Initial$2,000
Current$1,000reduced by $1,000
Repeatgravity 5
Citation #02001
408.11854(1)General Duty Clause or unstructured citation
Initial$4,000
Current$2,000reduced by $2,000
Repeat
Citation #03001
408.12154(1)General Duty Clause or unstructured citation
Initial$100
Current$50reduced by $50

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348405549 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Fraser Grinding Co

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348405549 directly: