Skip to main content
Inspection outcome
Opened: December 18, 2024 · Closed: March 13, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations13
Serious+0
Initial penalty$1,000
Current penalty$500
Accidents0
Duration85d
Summary

What happened in this inspection

On December 18, 2024, OSHA opened Mechanical Fabricators, Inc.’s inspection #347941015 at MARINE CITY, Michigan. The case was administratively closed on March 13, 2025, 85 days after opening.

OSHA cited the employer for 13 violations totaling $500 in current penalties — reduced from an initial proposed total of $1,000. All citations were Other-than-serious.

Breakdown by classification
13violations total
Serious215%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious1185%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

13citations issued
$500current penalty
↓ $500total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
408.10187(1)General Duty Clause or unstructured citation
Initial$500
Current$250reduced by $250
Seriousgravity 5
Citation #01002
29 CFR 1910.106(e)(6)(ii)View full regulation text on OSHA.gov
Initial$500
Current$250reduced by $250
Other
Citation #02002A
408.11843(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02002B
408.11845(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02003A
408.11853(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02003B
408.11854(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02003C
408.11854(5)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02004
408.11872(3)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02005
408.14923(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02006A
408.12153(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02006B
408.12154(1)General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347941015 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Mechanical Fabricators, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347941015 directly: