Skip to main content
Inspection outcome
Opened: April 5, 2023 · Closed: June 22, 2023
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations15
Serious+0
Initial penalty$7,200
Current penalty$3,600
Accidents0
Duration78d
Summary

What happened in this inspection

On April 5, 2023, OSHA opened Northern Machine Tool Company’s inspection #346612138 at MUSKEGON, Michigan. The case was administratively closed on June 22, 2023, 78 days after opening.

OSHA cited the employer for 15 violations totaling $3,600 in current penalties — reduced from an initial proposed total of $7,200. All citations were Other-than-serious.

Breakdown by classification
15violations total
Serious1387%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious213%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

15citations issued
$3,600current penalty
↓ $3,600total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01003
408.12648(1)General Duty Clause or unstructured citation
Initial$1,000
Current$500reduced by $500
Seriousgravity 5
Citation #01004
408.12635(2)General Duty Clause or unstructured citation
Initial$1,000
Current$500reduced by $500
Seriousgravity 5
Citation #01005A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$1,000
Current$500reduced by $500
Other
Citation #02001
408.10125General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02002
408.13308(3)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 10
Citation #01001A
408.12463(7)(C)General Duty Clause or unstructured citation
Initial$2,100
Current$1,050reduced by $1,050
Seriousgravity 10
Citation #01001B
408.12461(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 10
Citation #01001C
408.12411(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 10
Citation #01002A
408.12412(1)General Duty Clause or unstructured citation
Initial$2,100
Current$1,050reduced by $1,050
Seriousgravity 10
Citation #01002B
408.12461(2)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 10
Citation #01002C
408.12422(2)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 10
Citation #01002D
408.12477(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 10
Citation #01002E
408.10034(1)General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346612138 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346612138 directly: