Skip to main content
Inspection outcome
Opened: February 27, 2025 · Closed: May 20, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations5
Serious+0
Initial penalty$5,600
Current penalty$2,800
Accidents0
Duration82d
Summary

What happened in this inspection

On February 27, 2025, OSHA opened Pratt & Miller Engineering And Fabrication Llc’s inspection #348068503 at NEW HUDSON, Michigan — an establishment in the automobile manufacturing industry. The case was administratively closed on May 20, 2025, 82 days after opening.

OSHA cited the employer for 5 violations totaling $2,800 in current penalties — reduced from an initial proposed total of $5,600. All citations were Other-than-serious.

Breakdown by classification
5violations total
Serious5100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

5citations issued
$2,800current penalty
↓ $2,800total reduction
Look up on OSHA.gov
Seriousgravity 1
Citation #01001A
408.11115(1)General Duty Clause or unstructured citation
Initial$2,100
Current$1,050reduced by $1,050
Seriousgravity 1
Citation #01001B
408.11115(2)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 1
Citation #01001C
408.11116(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 5
Citation #01002A
408.15815(1)General Duty Clause or unstructured citation
Initial$3,500
Current$1,750reduced by $1,750
Seriousgravity 5
Citation #01002B
408.15815(2)General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348068503 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348068503 directly: