Skip to main content
Inspection outcome
Opened: July 9, 2025 · Status: Open
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations10
Serious+2
Initial penalty$22,800
Current penalty$13,680
Accidents0
Duration
Summary

What happened in this inspection

On July 9, 2025, OSHA opened Porex Technologies Corporation’s inspection #348361130 at SAINT CHARLES, Michigan. The case remains open or the close date has not yet been published.

OSHA cited the employer for 10 violations totaling $13,680 in current penalties — reduced from an initial proposed total of $22,800. Of those, 2 were classified as Serious or worse.

Breakdown by classification
10violations total
Repeat440%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious550%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious110%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

10citations issued
$13,680current penalty
↓ $9,120total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
408.10034(9)General Duty Clause or unstructured citation
Initial$2,000
Current$1,200reduced by $800
Seriousgravity 5
Citation #01002
408.10727(1)General Duty Clause or unstructured citation
Initial$2,000
Current$1,200reduced by $800
Seriousgravity 5
Citation #01003
408.11115(4)General Duty Clause or unstructured citation
Initial$2,000
Current$1,200reduced by $800
Seriousgravity 5
Citation #01004
408.11442(2)General Duty Clause or unstructured citation
Initial$2,000
Current$1,200reduced by $800
Seriousgravity 5
Citation #01005
408.12174(1)General Duty Clause or unstructured citation
Initial$2,000
Current$1,200reduced by $800
Repeatgravity 5
Citation #02001
408.10034(3)General Duty Clause or unstructured citation
Initial$6,000
Current$3,600reduced by $2,400
Repeatgravity 5
Citation #02002
408.10722(1)General Duty Clause or unstructured citation
Initial$6,000
Current$3,600reduced by $2,400
Repeat
Citation #04001
408.10632(1)General Duty Clause or unstructured citation
Initial$400
Current$240reduced by $160
Repeat
Citation #04002
408.10685(3)General Duty Clause or unstructured citation
Initial$400
Current$240reduced by $160

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348361130 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Porex Technologies Corporation

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348361130 directly: