Skip to main content
Inspection outcome
Opened: June 24, 2019 · Closed: January 19, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations12
Serious+0
Initial penalty$18,000
Current penalty$5,400
Accidents0
Duration940d
Summary

What happened in this inspection

On June 24, 2019, OSHA opened Moeller Precision Tool Llc’s inspection #344095609 at WIXOM, Michigan — an establishment in the machine shops industry. The case was administratively closed on January 19, 2022, 940 days after opening.

OSHA cited the employer for 12 violations totaling $5,400 in current penalties — reduced from an initial proposed total of $18,000. All citations were Other-than-serious.

Breakdown by classification
12violations total
Serious758%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious542%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

12citations issued
$5,400current penalty
↓ $12,600total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
408.10034(9)General Duty Clause or unstructured citation
Initial$4,500
Current$0reduced by $4,500
Seriousgravity 5
Citation #01002A
408.15836(1)General Duty Clause or unstructured citation
Initial$4,500
Current$0reduced by $4,500
Seriousgravity 5
Citation #01003
408.13312(1)General Duty Clause or unstructured citation
Initial$4,500
Current$2,700reduced by $1,800
Seriousgravity 5
Citation #01004A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$4,500
Current$0reduced by $4,500
Othergravity 5
Citation #01005
29 CFR 1910.30(a)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01006C
29 CFR 1910.147(d)(6)View full regulation text on OSHA.gov
Initial$0
Current$0
Other
Citation #02001A
408.15815(2)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02001B
408.15839(4)General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344095609 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Moeller Precision Tool Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344095609 directly: