Skip to main content
Inspection outcome
Opened: December 12, 2018 · Closed: May 29, 2019
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations3
Serious+0
Initial penalty$13,018
Current penalty$9,113
Accidents0
Duration168d
Summary

What happened in this inspection

On December 12, 2018, OSHA opened Merrick Machine Co.’s inspection #343655726 at ALDA, Nebraska. The case was administratively closed on May 29, 2019, 168 days after opening.

OSHA cited the employer for 3 violations totaling $9,113 in current penalties — reduced from an initial proposed total of $13,018. All citations were Other-than-serious.

Breakdown by classification
3violations total
Serious3100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

3citations issued
$9,113current penalty
↓ $3,905total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$4,508
Current$3,156reduced by $1,352
Seriousgravity 5
Citation #01002
29 CFR 1910.213(h)(1)View full regulation text on OSHA.gov
Initial$5,636
Current$3,945reduced by $1,691
Seriousgravity 1
Citation #01003
29 CFR 1910.242(b)View full regulation text on OSHA.gov
Initial$2,874
Current$2,012reduced by $862

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343655726 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Merrick Machine Co.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343655726 directly: