Skip to main content
Inspection outcome
Opened: March 11, 2024 · Closed: March 25, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations8
Serious+0
Initial penalty$40,332
Current penalty$40,332
Accidents0
Duration379d
Summary

What happened in this inspection

On March 11, 2024, OSHA opened Coining Mfg., Llc’s inspection #347335481 at CLIFTON, New Jersey. The case was administratively closed on March 25, 2025, 379 days after opening.

OSHA cited the employer for 8 violations totaling $40,332 in current penalties. All citations were Other-than-serious.

Breakdown by classification
8violations total
Serious563%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious338%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

8citations issued
$40,332current penalty
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.151(c)View full regulation text on OSHA.gov
Initial$8,067
Current$8,067
Seriousgravity 1
Citation #01002
29 CFR 1910.157(g)(1)View full regulation text on OSHA.gov
Initial$4,839
Current$4,839
Seriousgravity 5
Citation #01003
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$8,067
Current$8,067
Seriousgravity 10
Citation #01004
29 CFR 1910.212(b)View full regulation text on OSHA.gov
Initial$11,292
Current$11,292
Seriousgravity 5
Citation #01005
29 CFR 1910.215(b)(9)View full regulation text on OSHA.gov
Initial$8,067
Current$8,067

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347335481 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347335481 directly: