Skip to main content
Inspection outcome
Opened: February 9, 2024 · Closed: October 28, 2025
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Unprogrammed Other · Partial — limited to specific operations or areas

Violations4
Serious+4
Initial penalty$5,375
Current penalty$3,600
Accidents0
Duration627d
Summary

What happened in this inspection

On February 9, 2024, OSHA opened 156007 - Arce Framing Llc’s inspection #347280182 at ARDEN, North Carolina — an establishment in the framing contractors industry. The case was administratively closed on October 28, 2025, 627 days after opening.

OSHA cited the employer for 4 violations totaling $3,600 in current penalties — reduced from an initial proposed total of $5,375. Of those, 4 were classified as Serious or worse.

Breakdown by classification
4violations total
Serious4100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

4citations issued
$3,600current penalty
↓ $1,775total reduction
Look up on OSHA.gov
Serious
Citation #01001
29 CFR 1926.100(a)View full regulation text on OSHA.gov
Initial$750
Current$500reduced by $250
Serious
Citation #01002
29 CFR 1926.102(a)(1)View full regulation text on OSHA.gov
Initial$750
Current$500reduced by $250
Serious
Citation #01003
29 CFR 1926.451(g)(1)(vii)View full regulation text on OSHA.gov
Initial$3,125
Current$2,100reduced by $1,025
Serious
Citation #01004
29 CFR 1926.1053(b)(13)View full regulation text on OSHA.gov
Initial$750
Current$500reduced by $250

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347280182 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Unprogrammed Other — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347280182 directly: