Skip to main content
Inspection outcome
Opened: December 2, 2020 · Closed: May 20, 2021
Major citations

OSHA issued serious-tier citations with significant penalties.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations2
Serious+2
Initial penalty$28,000
Current penalty$22,400
Accidents0
Duration169d
Summary

What happened in this inspection

On December 2, 2020, OSHA opened 146924 - Genpak Llc’s inspection #345049886 at CHARLOTTE, North Carolina. The case was administratively closed on May 20, 2021, 169 days after opening.

OSHA cited the employer for 2 violations totaling $22,400 in current penalties — reduced from an initial proposed total of $28,000. Of those, 2 were classified as Serious or worse.

Breakdown by classification
2violations total
Repeat2100%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Citations

Citations issued in this inspection

2citations issued
$22,400current penalty
↓ $5,600total reduction
Look up on OSHA.gov
Repeat
Citation #01002
29 CFR 1910.147(c)(6)(i)View full regulation text on OSHA.gov
Initial$14,000
Current$0reduced by $14,000

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345049886 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345049886 directly: