Skip to main content
Inspection outcome
Opened: March 16, 2023 · Closed: November 14, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations4
Serious+0
Initial penalty$56,720
Current penalty$12,891
Accidents0
Duration609d
Summary

What happened in this inspection

On March 16, 2023, OSHA opened Professional Framing, Llc’s inspection #346571524 at LIBERTY TOWNSHIP, Ohio — an establishment in the framing contractors industry. The case was administratively closed on November 14, 2024, 609 days after opening.

OSHA cited the employer for 4 violations totaling $12,891 in current penalties — reduced from an initial proposed total of $56,720. All citations were Other-than-serious.

Breakdown by classification
4violations total
Repeat4100%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Citations

Citations issued in this inspection

4citations issued
$12,891current penalty
↓ $43,829total reduction
Look up on OSHA.gov
Repeatgravity 10
Citation #01001A
29 CFR 1926.501(b)(13)View full regulation text on OSHA.gov
Initial$25,781
Current$12,891reduced by $12,890
Repeatgravity 10
Citation #01001B
29 CFR 1926.20(b)(2)View full regulation text on OSHA.gov
Initial$10,313
Current$0reduced by $10,313
Repeatgravity 10
Citation #01002A
29 CFR 1926.503(a)(1)View full regulation text on OSHA.gov
Initial$10,313
Current$0reduced by $10,313
Repeatgravity 10
Citation #01002B
29 CFR 1926.503(b)(1)View full regulation text on OSHA.gov
Initial$10,313
Current$0reduced by $10,313

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346571524 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Professional Framing, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346571524 directly: