Skip to main content
Inspection outcome
Opened: June 27, 2023 · Closed: July 24, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Type M · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$20,092
Current penalty$12,056
Accidents0
Duration758d
Summary

What happened in this inspection

On June 27, 2023, OSHA opened Fabritech Solutions, Llc’s inspection #346798119 at OBERLIN, Ohio. The case was administratively closed on July 24, 2025, 758 days after opening.

OSHA cited the employer for 6 violations totaling $12,056 in current penalties — reduced from an initial proposed total of $20,092. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious6100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

6citations issued
$12,056current penalty
↓ $8,036total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.303(b)(1)View full regulation text on OSHA.gov
Initial$4,688
Current$2,813reduced by $1,875
Seriousgravity 5
Citation #01002
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$3,349
Current$2,009reduced by $1,340
Seriousgravity 5
Citation #01003
29 CFR 1910.303(g)(1)View full regulation text on OSHA.gov
Initial$2,679
Current$1,608reduced by $1,071
Seriousgravity 10
Citation #01004A
29 CFR 1910.332(b)(1)View full regulation text on OSHA.gov
Initial$4,688
Current$2,813reduced by $1,875
Seriousgravity 10
Citation #01004B
29 CFR 1910.333(a)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01005
29 CFR 1910.335(a)(1)(i)View full regulation text on OSHA.gov
Initial$4,688
Current$2,813reduced by $1,875

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346798119 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Type M — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346798119 directly: