Skip to main content
Inspection outcome
Opened: May 29, 2025 · Closed: January 15, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations7
Serious+0
Initial penalty$24,236
Current penalty$16,000
Accidents0
Duration231d
Summary

What happened in this inspection

On May 29, 2025, OSHA opened Jm Manufacturing Company, Inc.’s inspection #348275207 at COCHRANTON, Pennsylvania. The case was administratively closed on January 15, 2026, 231 days after opening.

OSHA cited the employer for 7 violations totaling $16,000 in current penalties — reduced from an initial proposed total of $24,236. All citations were Other-than-serious.

Breakdown by classification
7violations total
Other-than-serious7100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

7citations issued
$16,000current penalty
↓ $8,236total reduction
Look up on OSHA.gov
Othergravity 1
Citation #01001
29 CFR 1910.22(a)(2)View full regulation text on OSHA.gov
Initial$7,093
Current$3,000reduced by $4,093
Othergravity 1
Citation #01002
29 CFR 1910.178(p)(1)View full regulation text on OSHA.gov
Initial$7,093
Current$3,000reduced by $4,093
Othergravity 5
Citation #01003A
29 CFR 1910.305(g)(2)(iii)View full regulation text on OSHA.gov
Initial$10,050
Current$10,000reduced by $50

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348275207 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Jm Manufacturing Company, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348275207 directly: