Skip to main content
Inspection outcome
Opened: September 26, 2023 · Status: Open
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations19
Serious+0
Initial penalty$19,800
Current penalty$11,800
Accidents0
Duration
Summary

What happened in this inspection

On September 26, 2023, OSHA opened Industrial Plating Company, Inc.’s inspection #346995020 at CHATTANOOGA, Tennessee. The case remains open or the close date has not yet been published.

OSHA cited the employer for 19 violations totaling $11,800 in current penalties — reduced from an initial proposed total of $19,800. All citations were Other-than-serious.

Breakdown by classification
19violations total
Repeat15%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious1895%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

19citations issued
$11,800current penalty
↓ $8,000total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001A
TDLWD RULE 800-01-01-.07(2)(B)1General Duty Clause or unstructured citation
Initial$1,200
Current$1,200
Seriousgravity 5
Citation #01001B
TDLWD RULE 800-01-01-.07(2)(D)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 6
Citation #01003
29 CFR 1910.95(b)(1)View full regulation text on OSHA.gov
Initial$1,400
Current$1,400
Seriousgravity 8
Citation #01004B
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 8
Citation #01004C
29 CFR 1910.134(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 8
Citation #01004E
29 CFR 1910.134(k)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 8
Citation #01005A
29 CFR 1910.1026(c)View full regulation text on OSHA.gov
Initial$4,000
Current$4,000
Seriousgravity 8
Citation #01005B
29 CFR 1910.1026(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 8
Citation #01005D
29 CFR 1910.1026(g)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01005E
29 CFR 1910.1026(h)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01005F
29 CFR 1910.1026(i)(5)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346995020 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Industrial Plating Company, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346995020 directly: