Skip to main content
Inspection outcome
Opened: June 25, 2019 · Closed: May 21, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations15
Serious+0
Initial penalty$17,618
Current penalty$8,600
Accidents0
Duration331d
Summary

What happened in this inspection

On June 25, 2019, OSHA opened Stonemode Granite, Llc’s inspection #344106265 at DALLAS, Texas. The case was administratively closed on May 21, 2020, 331 days after opening.

OSHA cited the employer for 15 violations totaling $8,600 in current penalties — reduced from an initial proposed total of $17,618. All citations were Other-than-serious.

Breakdown by classification
15violations total
Serious15100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

15citations issued
$8,600current penalty
↓ $9,018total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.95(c)(1)View full regulation text on OSHA.gov
Initial$2,842
Current$2,000reduced by $842
Seriousgravity 10
Citation #01002A
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$0
Current$2,400
Seriousgravity 1
Citation #01002B
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002C
29 CFR 1910.134(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002E
29 CFR 1910.1053(c)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002F
29 CFR 1910.1053(f)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002G
29 CFR 1910.1053(g)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01003A
29 CFR 1910.1053(d)(1)View full regulation text on OSHA.gov
Initial$3,978
Current$2,400reduced by $1,578
Seriousgravity 10
Citation #01003B
29 CFR 1910.1053(e)(2)(ii)View full regulation text on OSHA.gov
Initial$3,978
Current$0reduced by $3,978
Seriousgravity 10
Citation #01004B
29 CFR 1910.1053(j)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01004C
29 CFR 1910.1053(j)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01004D
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01005A
29 CFR 1910.1053(f)(2)(i)View full regulation text on OSHA.gov
Initial$2,842
Current$1,800reduced by $1,042
Seriousgravity 10
Citation #01005B
29 CFR 1910.1053(i)(1)(i)View full regulation text on OSHA.gov
Initial$3,978
Current$0reduced by $3,978

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344106265 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Stonemode Granite, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344106265 directly: