Skip to main content
Inspection outcome
Opened: December 11, 2024 · Closed: July 9, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Type M · Partial — limited to specific operations or areas

Violations8
Serious+0
Initial penalty$106,398
Current penalty$56,606
Accidents0
Duration210d
Summary

What happened in this inspection

On December 11, 2024, OSHA opened Henson Lumber, Ltd’s inspection #347928418 at DECATUR, Texas. The case was administratively closed on July 9, 2025, 210 days after opening.

OSHA cited the employer for 8 violations totaling $56,606 in current penalties — reduced from an initial proposed total of $106,398. All citations were Other-than-serious.

Breakdown by classification
8violations total
Serious788%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious113%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

8citations issued
$56,606current penalty
↓ $49,792total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$14,895
Current$10,427reduced by $4,468
Othergravity 5
Citation #01002
29 CFR 1910.106(d)(6)(iii)View full regulation text on OSHA.gov
Initial$12,768
Current$8,938reduced by $3,830
Seriousgravity 5
Citation #01003A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$10,641
Current$7,449reduced by $3,192
Seriousgravity 5
Citation #01003B
29 CFR 1910.147(c)(7)(i)View full regulation text on OSHA.gov
Initial$10,641
Current$0reduced by $10,641
Seriousgravity 5
Citation #01005
29 CFR 1910.178(m)(5)(ii)View full regulation text on OSHA.gov
Initial$12,768
Current$8,938reduced by $3,830
Seriousgravity 10
Citation #01006A
29 CFR 1910.178(p)(1)View full regulation text on OSHA.gov
Initial$14,895
Current$10,427reduced by $4,468
Seriousgravity 10
Citation #01006B
29 CFR 1910.178(q)(7)View full regulation text on OSHA.gov
Initial$14,895
Current$0reduced by $14,895
Seriousgravity 10
Citation #01008
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$14,895
Current$10,427reduced by $4,468

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347928418 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Type M — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347928418 directly: