Skip to main content
Inspection outcome
Opened: November 8, 2019 · Closed: June 26, 2023
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Unprogrammed Other · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$13,976
Current penalty$5,808
Accidents0
Duration1326d
Summary

What happened in this inspection

On November 8, 2019, OSHA opened Allpro Manufacturing, Inc’s inspection #344440201 at HOUSTON, Texas. The case was administratively closed on June 26, 2023, 1326 days after opening.

OSHA cited the employer for 6 violations totaling $5,808 in current penalties — reduced from an initial proposed total of $13,976. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious350%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious350%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

6citations issued
$5,808current penalty
↓ $8,168total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$3,856
Current$2,310reduced by $1,546
Other
Citation #01002
29 CFR 1910.151(c)View full regulation text on OSHA.gov
Initial$3,856
Current$0reduced by $3,856
Seriousgravity 10
Citation #01003A
29 CFR 1910.217(d)(9)(iv)View full regulation text on OSHA.gov
Initial$5,398
Current$3,238reduced by $2,160
Seriousgravity 5
Citation #01003B
29 CFR 1910.217(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Other
Citation #02001A
29 CFR 1910.303(b)(7)(i)View full regulation text on OSHA.gov
Initial$433
Current$260reduced by $173
Other
Citation #02001B
29 CFR 1910.305(b)(2)(i)View full regulation text on OSHA.gov
Initial$433
Current$0reduced by $433

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344440201 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Allpro Manufacturing, Inc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Unprogrammed Other — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344440201 directly: