Skip to main content
Inspection outcome
Opened: July 18, 2019 · Closed: August 24, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Referral · Partial — limited to specific operations or areas

Violations16
Serious+0
Initial penalty$51,081
Current penalty$26,000
Accidents0
Duration403d
Summary

What happened in this inspection

On July 18, 2019, OSHA opened General Engineering Company’s inspection #344413158 at ABINGDON, Virginia — an establishment in the machine shops industry. The case was administratively closed on August 24, 2020, 403 days after opening.

OSHA cited the employer for 16 violations totaling $26,000 in current penalties — reduced from an initial proposed total of $51,081. All citations were Other-than-serious.

Breakdown by classification
16violations total
Serious1594%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious16%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

16citations issued
$26,000current penalty
↓ $25,081total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01002
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$4,110
Current$1,099reduced by $3,011
Seriousgravity 10
Citation #01001A
29 CFR 1910.132(d)(2)View full regulation text on OSHA.gov
Initial$12,726
Current$7,000reduced by $5,726
Seriousgravity 10
Citation #01001B
29 CFR 1910.133(a)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003A
29 CFR 1910.146(c)(2)View full regulation text on OSHA.gov
Initial$5,515
Current$3,033reduced by $2,482
Seriousgravity 5
Citation #01003B
29 CFR 1910.146(c)(4)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01004
29 CFR 1910.146(g)(1)View full regulation text on OSHA.gov
Initial$5,515
Current$3,033reduced by $2,482
Seriousgravity 5
Citation #01005A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$5,395
Current$2,925reduced by $2,470
Seriousgravity 10
Citation #01006A
29 CFR 1910.1026(c)View full regulation text on OSHA.gov
Initial$8,910
Current$4,455reduced by $4,455
Seriousgravity 10
Citation #01006C
29 CFR 1910.1026(g)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01006D
29 CFR 1910.1026(e)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01007A
29 CFR 1910.1026(d)(1)View full regulation text on OSHA.gov
Initial$8,910
Current$4,455reduced by $4,455
Seriousgravity 10
Citation #01007B
29 CFR 1910.1026(l)(2)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344413158 at OSHA Establishment Search.

Same employer

Other OSHA inspections at General Engineering Company

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344413158 directly: