Skip to main content
Inspection outcome
Opened: November 17, 2021 · Closed: August 19, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations11
Serious+0
Initial penalty$107,733
Current penalty$68,165
Accidents0
Duration275d
Summary

What happened in this inspection

On November 17, 2021, OSHA opened Bae Systems Ordnance Systems, Inc.’s inspection #345649503 at RADFORD, Virginia. The case was administratively closed on August 19, 2022, 275 days after opening.

OSHA cited the employer for 11 violations totaling $68,165 in current penalties — reduced from an initial proposed total of $107,733. All citations were Other-than-serious.

Breakdown by classification
11violations total
Serious436%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious764%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

11citations issued
$68,165current penalty
↓ $39,568total reduction
Look up on OSHA.gov
Othergravity 5
Citation #01001
29 CFR 1910.22(a)(1)View full regulation text on OSHA.gov
Initial$10,360
Current$6,734reduced by $3,626
Othergravity 10
Citation #01002
29 CFR 1910.119(e)(6)View full regulation text on OSHA.gov
Initial$14,502
Current$14,502
Othergravity 10
Citation #01003A
29 CFR 1910.119(j)(2)View full regulation text on OSHA.gov
Initial$14,502
Current$14,502
Othergravity 10
Citation #01004A
29 CFR 1910.119(m)(4)(ii)View full regulation text on OSHA.gov
Initial$14,502
Current$9,326reduced by $5,176
Othergravity 10
Citation #01004B
29 CFR 1910.119(o)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01005
29 CFR 1910.134(d)(1)(ii)View full regulation text on OSHA.gov
Initial$14,502
Current$0reduced by $14,502
Seriousgravity 5
Citation #01006
29 CFR 1910.134(h)(2)(i)View full regulation text on OSHA.gov
Initial$12,431
Current$8,080reduced by $4,351
Seriousgravity 5
Citation #01007
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$10,360
Current$6,734reduced by $3,626
Seriousgravity 5
Citation #01008
29 CFR 1910.1025(h)(2)(ii)View full regulation text on OSHA.gov
Initial$8,287
Current$0reduced by $8,287

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345649503 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Bae Systems Ordnance Systems, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345649503 directly: