Skip to main content
Inspection outcome
Opened: June 13, 2025 · Closed: December 18, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations8
Serious+0
Initial penalty$1,836
Current penalty$0
Accidents0
Duration188d
Summary

What happened in this inspection

On June 13, 2025, OSHA opened Wa317986499 - Gage Craft Gear Incorporated’s inspection #348317702 at MARYSVILLE, Washington — an establishment in the machine shops industry. The case was administratively closed on December 18, 2025, 188 days after opening.

OSHA cited the employer for 8 violations totaling $0 in current penalties — reduced from an initial proposed total of $1,836. All citations were Other-than-serious.

Breakdown by classification
8violations total
Other-than-serious8100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

8citations issued
$0current penalty
↓ $1,836total reduction
Look up on OSHA.gov
Other
Citation #01001
296-806-45004General Duty Clause or unstructured citation
Initial$612
Current$0reduced by $612
Other
Citation #01002
296-806-20030General Duty Clause or unstructured citation
Initial$612
Current$0reduced by $612
Other
Citation #01003
296-807-14020(1)General Duty Clause or unstructured citation
Initial$612
Current$0reduced by $612
Other
Citation #02001
296-800-28025(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02002
296-800-28025(2)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02003
296-800-13025(2)General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02004
296-800-16010General Duty Clause or unstructured citation
Initial$0
Current$0
Other
Citation #02005
296-803-20005(1)General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348317702 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348317702 directly: