Seriousgravity 5
Citation #0100129 CFR 1910.137(c)(2)(viii)View full regulation text on OSHA.govInitial$10,728
→
Current$15,625
OSHA Inspection
Didion Milling, Inc. — OSHA Inspection #345054811
CAMBRIA, Wisconsin · NAICS 311211 · 174 workers on site
Inspection outcome
Opened: December 8, 2020 · Closed: February 7, 2025
○
Citations issued
OSHA issued one or more Other-than-serious citations.
Safety inspection · Type M · Partial — limited to specific operations or areas
Violations14
Serious+0
Initial penalty$676,808
Current penalty$312,509
Accidents0
Duration1522d
Summary
What happened in this inspection
On December 8, 2020, OSHA opened Didion Milling, Inc.’s inspection #345054811 at CAMBRIA, Wisconsin. The case was administratively closed on February 7, 2025, 1522 days after opening.
OSHA cited the employer for 14 violations totaling $312,509 in current penalties — reduced from an initial proposed total of $676,808. All citations were Other-than-serious.
Breakdown by classification
14violations total
Repeat429%
A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.
Serious1071%
A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.
Citations
Citations issued in this inspection
Seriousgravity 5
Citation #0100229 CFR 1910.147(c)(4)(ii)(b)View full regulation text on OSHA.govInitial$10,728
→
Current$15,625
Seriousgravity 10
Citation #0100329 CFR 1910.147(c)(6)(i)View full regulation text on OSHA.govInitial$13,653
→
Current$15,625
Seriousgravity 10
Citation #0100429 CFR 1910.272(e)(2)View full regulation text on OSHA.govInitial$13,653
→
Current$15,625
Seriousgravity 10
Citation #0100529 CFR 1910.272(g)(1)(i)View full regulation text on OSHA.govInitial$13,653
→
Current$15,625
Seriousgravity 10
Citation #0100629 CFR 1910.272(g)(1)(ii)View full regulation text on OSHA.govInitial$13,653
→
Current$15,625
Seriousgravity 10
Citation #0100729 CFR 1910.272(g)(1)(iv)View full regulation text on OSHA.govInitial$13,653
→
Current$15,625
Seriousgravity 10
Citation #0100829 CFR 1910.272(g)(2)View full regulation text on OSHA.govInitial$13,653
→
Current$15,625
Seriousgravity 10
Citation #0100929 CFR 1910.272(g)(4)View full regulation text on OSHA.govInitial$13,653
→
Current$15,625
Seriousgravity 10
Citation #0101029 CFR 1910.272(g)(6)View full regulation text on OSHA.govInitial$13,653
→
Current$15,625
Repeatgravity 10
Citation #02001A29 CFR 1910.272(g)(1)(ii)View full regulation text on OSHA.govInitial$136,532
→
Current$156,259
Repeatgravity 10
Citation #02001B29 CFR 1910.272(g)(1)(iv)View full regulation text on OSHA.govInitial$136,532
→
Current$0reduced by $136,532
Repeatgravity 10
Citation #02001C29 CFR 1910.272(g)(3)View full regulation text on OSHA.govInitial$136,532
→
Current$0reduced by $136,532
Repeatgravity 10
Citation #02001D29 CFR 1910.272(g)(6)View full regulation text on OSHA.govInitial$136,532
→
Current$0reduced by $136,532
Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345054811 at OSHA Establishment Search.
Same employer
Other OSHA inspections at Didion Milling, Inc.
Earlier or related cases at this establishment.
Open caseMay 8, 2026
Safety inspection#348925314
Case still open. Citations may follow.
Open caseApr 20, 2026
Safety inspection#348886110
Case still open. Citations may follow.
No violationsSep 4, 2024
Safety inspection#347736514
Closed Mar 25 — no citations.
No violationsMay 5, 2022
Safety inspection#345941199
Closed Jul 10 — no citations.
No violationsMar 2, 2020
Safety inspection#344667597
Closed Oct 8 — no citations.
No violationsJan 28, 2020
Safety inspection#344585450
Closed Jun 18 — no citations.
Reference
About OSHA inspections
The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.
Citations
Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.
Open vs closed
An open case has not yet been administratively closed — citations may follow or the case may close without action.
Current vs initial penalty
Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.
Trigger types
A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.
About this inspection
OSHA classified this as Type M — See our glossary for the full list of inspection trigger types.
Sources
Cross-check with OSHA directly
This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345054811 directly:
From the blog
Understand OSHA enforcement
Guides and analysis from our editorial team.
Data report
Industries With the Most OSHA Violations on Record (2026)
NAICS industries ranked by total OSHA citations and total inspections in the current enforcement window. Construction and specialty trades dominate both leaderboards.
Data report
The 15 U.S. Cities With the Most OSHA Inspections (2026)
A city-by-city ranking of U.S. metros with the highest OSHA inspection counts in the current enforcement window — what the city-level data reveals about regional safety enforcement.
Data report
OSHA Enforcement in 2026, By the Numbers: 426,000 Employers on Record
An overview of OSHA enforcement activity across 426,760 U.S. employers — 575,985 inspections, 24,000 violations, and $62,581,468 in penalties currently on file.
Data report
Seattle vs. Portland: OSHA Enforcement in Two Pacific Northwest Cities Compared
A side-by-side comparison of OSHA enforcement activity in Seattle and Portland — inspection counts, violations, penalties, and what the data reveals about workplace safety in each city.
Data report
The 10 U.S. Employers With the Largest OSHA Penalties on Record (2026)
A ranked list of the ten U.S. employers carrying the highest cumulative OSHA penalty assessments in the current enforcement window, with links to their full inspection histories.
Data report
The 10 Most-Inspected U.S. Employers in OSHA Records (2026)
Ten U.S. employers with the highest OSHA inspection counts across the current five-year enforcement window, ranked with links to each company's full record.
Data report
Top 10 Alabama Employers by OSHA Inspections (2026)
The ten Alabama employers with the most OSHA inspections on record in the current enforcement window — with violation counts, penalty totals, and links to each full inspection record.
Data report
Top 10 Alaska Employers by OSHA Inspections (2026)
The ten Alaska employers with the most OSHA inspections on record in the current enforcement window — with violation counts, penalty totals, and links to each full inspection record.
Data report
Top 10 Arizona Employers by OSHA Inspections (2026)
The ten Arizona employers with the most OSHA inspections on record in the current enforcement window — with violation counts, penalty totals, and links to each full inspection record.