Skip to main content
Inspection outcome
Opened: March 9, 2020 · Closed: July 14, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations2
Serious+0
Initial penalty$770
Current penalty$770
Accidents0
Duration1953d
Summary

What happened in this inspection

On March 9, 2020, OSHA opened Applied Molding Technologies, Llc.’s inspection #344683586 at FREDERIC, Wisconsin. The case was administratively closed on July 14, 2025, 1953 days after opening.

OSHA cited the employer for 2 violations totaling $770 in current penalties. All citations were Other-than-serious.

Breakdown by classification
2violations total
Other-than-serious2100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

2citations issued
$770current penalty
Look up on OSHA.gov
Other
Citation #02001
29 CFR 1903.19(c)(1)View full regulation text on OSHA.gov
Initial$770
Current$770

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344683586 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Applied Molding Technologies, Llc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344683586 directly: